Kenwood TM-G707 Bedienungsanleitung PDF herunterladen (Seite 64)

S-METER SQUELCH

By activating S-meter Squelch, the squelch does not

open until a signal with the same or greater strength

than the S-meter setting is received. This function is

useful to eliminate constantly resetting the squelch when

receiving weak stations that you have no interest in.

1 Press [MNU] to enter Menu mode.

2 Select Menu No. 14 (S.SQL).

3 Press

[OK]

, then turn the Tuning control to switch the

function ON (or OFF).

4 Press

[OK]

again to complete the setting and exit

Menu mode.

• The S-meter setting segments appear.

5 Turn the SQL control to select the desired S-meter

setting from the 7 levels.

■ Squelch Hang Time

When using S-meter Squelch, you may want to adjust

the time interval between when the received signals

drop and when the squelch closes.

1 Press [MNU] to enter Menu mode.

2 Select Menu No. 15 (HNG.T).

3 Press

[OK]

, then turn the Tuning control to select

from OFF (default), 125 ms, 250 ms and 500 ms.

4 Press

[OK]

again to complete the setting and exit

Menu mode.

Note:

Menu No. 15 is selectable only when the S-meter Squelch is

ON.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

Keine Kommentare

Kenwood TM-G707 Bedienungsanleitung Seite 64