Kenwood TM-G707 Bedienungsanleitung PDF herunterladen (Seite 22)

SELECTING FREQUENCIES

■ Tuning Control

Using the Tuning control is convenient when you are

within easy reach of the transceiver front panel, and

the frequencies to be selected are near the current

frequency.

1 Press [VFO] to select VFO mode.

2 Turn the Tuning control clockwise to increase the

frequency or counterclockwise to decrease the

frequency.

•You can also select frequencies via the microphone

keypad (MC-53DM only). See “KEYPAD DIRECT

ENTRY” {page 54}.

•To change frequencies in steps of 1 MHz, press

[MHz] first. Pressing [MHz] again cancels the

1 MHz function.

•To change frequencies in steps of 10 MHz, press

[F]

+[MHz] first; do not press

[F]

for longer than

1 second. Pressing

[F]

cancels the 10 MHz function;

pressing [MHz] starts the 1 MHz function.

Note:

If you cannot select a particular frequency, you need to

change the frequency step size. See “CHANGING FREQUENCY

STEP SIZE” {page 55} for further information.

■ Microphone [UP]/ [DWN] Buttons

Using Mic [UP]/ [DWN] for frequency selection is

useful when mobiling or any time you are not

immediately in front of the transceiver.

Press Mic [UP] or [DWN] once to change the

frequency by one step in the direction indicated by

the button.

• Pressing and holding the button causes the frequency to

step repeatedly. Release it to stop the frequency

change.

•To change frequencies in steps of 1 MHz (or 10 MHz),

press [MHz] (or

[F]

+[MHz]) first.

MC-53DM

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenwood TM-G707 Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Radio Stationen Kenwood TM-G707