Kenwood TM-G707 Bedienungsanleitung PDF herunterladen (Seite 23)

TRANSMITTING

1 When ready to begin transmitting, press and hold Mic

[PTT] and speak in a normal tone of voice.

• “ON AIR” and the RF power meter appear.

• Speaking too close to the microphone, or too loudly,

may increase distortion and reduce intelligibility of your

signal at the receiving station.

• The RF power meter shows the relative transmit output

power.

2 When you finish speaking, release Mic [PTT].

■ Selecting Output Power

It’s wise, and required by law, to select the lowest

power that allows reliable communication. If

operating from battery power, lower transmit power

will give you more operating time before a charge is

necessary. Reducing power lowers the risk of

interfering with others on the band.

Press

[LOW]

to select high (“H”), medium (“M”), or

low (“L”) power. The default is high.

CAUTION:

◆

DO NOT TRANSMIT WITH HIGH OUTPUT POWER FOR

EXTENDED PERIODS. THE TRANSCEIVER MAY OVERHEAT

AND MALFUNCTION.

◆

CONTINUOUS TRANSMISSION CAUSES THE HEAT SINK TO

OVERHEAT. NEVER TOUCH THE HEAT SINK WHEN IT MAY BE

HOT.

Note:

When the transceiver overheats because of ambient high

temperature or continuous transmission, the protective circuit may

function to lower transmit output power.

MC-53DM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 83 84

Keine Kommentare

Kenwood TM-G707 Bedienungsanleitung Seite 23