Kenwood TM-G707 Bedienungsanleitung PDF herunterladen (Seite 30)

■ Activating Tone Function

1 Select the desired band.

2 Press

[TONE]

to activate the Tone function.

• Each time you press

[TONE]

, the selection changes

as shown below.

TM-G707E Only:

When you access repeaters that require 1750 Hz

tones, you need not activate the Tone function. No matter which

selection you make here, pressing the Mic PF key assigned the

1750 Hz Tone function {page 51}

causes the transceiver to transmit

1750 Hz tones.

■ Selecting a Tone Frequency

1 Select the desired band.

2 Press

[TONE]

to activate the Tone function.

3 Press

[F]

[T.SEL]

• The current tone frequency appears and blinks. The

default is 88.5 Hz.

4 Turn the Tuning control, or press Mic

[UP]/ [DWN], to select a tone frequency.

5 Press

[OK]

to complete the setting.

TM-G707E Only:

To transmit a 1750 Hz tone, assign the 1750 Hz

Tone function to one of the Programmable Function (PF) keys of the

microphone {page 51}.

Note:

If you store tone settings in memory channels, you need not

make the settings every time. Recalling the memory channels will

restore the tone settings which you make this time. Refer to

“MEMORY CHANNELS” {page 27}.

U.S.A./ Canada Only:

Use Nos. 01 to 38 shown in the table above

when selecting tone frequencies via Keypad Direct Entry {page 55}.

1 2

No Indicator

CTCSS

(“CT”)

Tone

(“T”)

.oN

.qerF

)zH(

.oN

.qerF

)zH(

.oN

.qerF

)zH(

.oN

.qerF

)zH(

100.76114.79125.631138.291

209.17210.001223.141235.302

304.47315.301322.641337.012

400.77412.701424.151431.812

507.97519.011527.651537.522

605.28618.411622.261636.332

704.58718.811729.761738.142

805.88810.321828.371833.052

905.19913.721929.971

018.49028.131032.681

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenwood TM-G707 Bedienungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Radio Stationen Kenwood TM-G707