Kenwood TM-G707 Bedienungsanleitung PDF herunterladen (Seite 48)

PROGRAM SCAN

Program Scan is identical with VFO Scan except that

you select the frequency range of the scan.

■ Setting Scan Limits

You can store up to 6 scan ranges in memory

channels L1/U1 to L6/U6.

1 Select the desired band.

2 Select the desired frequency as the lower limit.

3 Press

[F]

4 Select a channel in the range from L1 to L6.

5 Press [MR].

• The lower limit is stored in the channel.

6 Select the desired frequency as the upper limit.

7 Press

[F]

8 Select a matching channel in the range from U1 to

U6.

• If you have selected, for example, L3 in step 4,

select U3.

9 Press [MR].

• The upper limit is stored in the channel.

10 To confirm the stored scan limits, press [MR], then

select the L and U channels.

Note:

◆

The lower limit must be lower in frequency than the upper limit.

◆

The lower and upper frequency steps must be equal.

◆

The lower and upper limits must be selected on the same band.

1 s

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 83 84

Keine Kommentare

Kenwood TM-G707 Bedienungsanleitung Seite 48