Kenwood TM-G707 Bedienungsanleitung PDF herunterladen (Seite 42)

STORING DATA IN PM CHANNELS

1 Confirm that the following conditions have been

satisfied:

• The transceiver is in the receive mode.

• Scan is not being used.

• Microphone Control is OFF.

2 Select the desired band.

3 Select the desired frequency and related data (Tone,

CTCSS, etc.) using VFO mode.

4 If required, select another band, then select the

desired frequency and related data.

5 Press

[F]

, [PM].

• The PM channel numbers appear and blink.

6 Press

[1]

[4]

corresponding to the desired PM

channel.

• The selected frequency and related data are stored in

the PM channel.

RECALLING PM CHANNELS

1 Press [PM].

• The PM channel numbers appear.

2 Press

[1]

[4]

corresponding to the desired PM

channel.

• The contents of the selected channel are recalled.

• The selected channel number appears and slowly

blinks.

•To exit PM Recall mode, press [PM],

[PM OFF]

Note:

You cannot recall a PM memory channel while transmitting.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 83 84

Keine Kommentare

Kenwood TM-G707 Bedienungsanleitung Seite 42