Kenwood TM-G707 Bedienungsanleitung PDF herunterladen (Seite 59)

PROGRAMMABLE VFO

If you want, you can set limits for the minimum and

maximum frequencies that are selectable using the

Tuning control. For example, if you select 145 MHz for

the lower limit and 146 MHz for the upper limit, the

tunable range will be from 145.000 MHz to

146.995 MHz. This function will be useful if you always

check frequencies within a certain range.

Note:

◆

You cannot program the 100 kHz and subsequent digits.

◆

The exact 100 kHz and subsequent digits of the upper limit depend

on the step size selected.

◆

You can select the lower and upper limits within the allowable receive

frequency range that differs depending on the markets.

1 Press [VFO] to select VFO mode.

2 Select the desired band.

3 Press [MNU] to enter Menu mode.

4 Select Menu No. 9 (PROG.VFO).

5 Press

[OK]

, then select the lower frequency limit.

6 Press

[OK]

again, then select the upper frequency

limit.

7 Press

[OK]

once again to complete the setting and

exit Menu mode.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 83 84

Keine Kommentare

Kenwood TM-G707 Bedienungsanleitung Seite 59