Kenwood TM-G707 Bedienungsanleitung PDF herunterladen (Seite 34)

STORING SIMPLEX FREQUENCIES OR STANDARD

REPEATER FREQUENCIES

1 Press [VFO] to select VFO mode.

2 Press [BAND] to select the desired band.

3 Turn the Tuning control, or press Mic [UP]/ [DWN], to

select the desired frequency.

•You can also enter digits directly from the microphone

keypad (MC-53DM only). See page 54.

4 If storing a standard repeater frequency, select the

following data:

Offset direction {page 23}

Tone ON, if necessary {page 24}

Tone frequency, if necessary {page 24}

• If storing a simplex frequency, you may select other

related data (CTCSS ON, CTCSS freq. etc.).

5 Press

[F]

•A memory channel number appears.

•A triangle icon appears above the memory channel

number if the channel already contained data.

6 Turn the Tuning control, or press Mic [UP]/ [DWN], to

select the desired memory channel (within approx.

10 seconds).

7 Press [MR].

• The selected frequency and related data are stored in

the memory channel.

STORING ODD-SPLIT REPEATER FREQUENCIES

Some repeaters use a receive and transmit frequency

pair with a non-standard offset. To access those

repeaters, store two separate frequencies in a memory

channel. You then can operate on those repeaters

without changing the offset programming in the Menu.

1 Select the appropriate receive frequency by using

steps 1 to 6 (not 7) given for simplex or standard

repeater frequencies.

• If necessary, select Tone ON {page 24} and tone

frequency {page 24}.

2 Press [MR] (1 s).

• “–” and “+” appear.

3 Select the appropriate transmit frequency (within

approx. 10 seconds).

4 Press [MR].

• The selected transmit frequency is stored in the memory

channel.

Note:

◆

When you recall an odd-split memory channel, “–” and “+” appear on

the display. Press

[REV]

to display the transmit frequency.

◆

In step 2 you cannot use Mic

[MR]

, nor Mic

[PF]

programmed with

Memory Recall.

◆

Transmit Offset status and Reverse status are not stored in an

odd-split memory channel.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenwood TM-G707 Bedienungsanleitung Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Radio Stationen Kenwood TM-G707