Kenwood TM-G707 Bedienungsanleitung PDF herunterladen (Seite 46)

VFO SCAN

VFO Scan allows you to scan all frequencies from the

lowest frequency to the highest frequency on the band.

The current frequency step size {page 55} is used.

1 Select the desired band.

2 Press [VFO] (1 s).

• The 1 MHz decimal blinks while scanning is in progress.

• Scan starts at the frequency currently displayed.

•To reverse the scan direction, turn the Tuning control

clockwise (upward scan) or counterclockwise

(downward scan), or press Mic [UP]/ [DWN].

3 To quit VFO Scan, press any key other than [MHz]

and Mic [UP]/ [DWN].

Note:

The squelch must be closed for Scan to function.

MEMORY SCAN

Memory Scan allows all memory channels containing

data to be scanned.

1 Press [MR] (1 s).

• The 1 MHz decimal blinks while scanning is in progress.

• Scan starts with the channel last recalled.

•To reverse the scan direction, turn the Tuning control

clockwise (upward scan) or counterclockwise

(downward scan), or press Mic [UP]/ [DWN].

2 To quit Memory Scan, press any key other than Mic

[UP]/ [DWN].

Note:

◆

At least 2 or more memory channels must contain data and must not

be locked out.

◆

The squelch must be closed for Scan to function.

◆

The L1 to L6 and U1 to U6 memory channels and the priority channel

are not scanned.

◆

You can also start Memory Scan when in Channel Display mode.

While Scan is being interrupted, the channel number blinks.

◆

If you select “ONE” using Menu No. 4 (MR), memory channels on

only the current band will be scanned; otherwise, memory channels

on both VHF and UHF bands will be scanned.

1 s

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenwood TM-G707 Bedienungsanleitung Seite 46

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Radio Stationen Kenwood TM-G707