Kenwood NX-210G Bedienungsanleitung PDF herunterladen (Seite 36)

■ Stun Code

This function is used when a transceiver is stolen or lost.

When the transceiver receives a call containing a stun

code, the transceiver becomes disabled. The stun code is

cancelled when the transceiver receives a call with a revive

code.

TRUNKING CALLS

■ Making a Telephone Call

Manual Dialing (Analog)

1 Select your desired zone and telephone group ID.

2 Press the PTT switch to start the call.

3 Enter your desired number using the DTMF keys.

Selecting a Number from the List

1 Select your desired zone and telephone group ID.

2 Press the key programmed as Autodial.

• The last called unit appears on the display.

3 Press / to select your desired list number.

4 Press the PTT switch to make the call.

■ Receiving a Telephone Call

When a call is received, press and hold the PTT switch to

speak, and release it to receive.

• Only one person can speak at a time.

EMERGENCY CALLS

If your transceiver has been programmed with the Emergency

function, you can make emergency calls.

1 Press and hold the key programmed as Emergency.

• Ask your dealer for the length of time necessary to hold this

key before the transceiver enters Emergency mode.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Keine Kommentare

Kenwood NX-210G Bedienungsanleitung Seite 36