Kenwood DM-SG7 Bedienungsanleitung PDF herunterladen (Seite 49)

DM-SG7(EN)

In case of difficulty

What appears to be a malfunction may not always be serious. If your unit should not perform as expected,

consult the table below to see if the problem can be corrected before seeking help from your dealer or

service representative.

Operation to reset

The microprocessor may fall into malfunction (impossibility

to operate erroneous display, etc.) when the power cord is

unplugged while power is ON or due to an external factor.

In this case, execute the following procedure to reset the

microprocessor and return it to normal condition.

Unplug the power cord from the power outlet

then, while holding the eject (0) key depressed,

plug the power cord again.

Symptoms related to MD standard

Symptom

¶ More than 255 tracks (track No. 256 or more) cannot be

recorded. (There may be also cases in which recording is

impossible while the track number is less than 256.)

In such a case, the REMAIN time display shows “0:00”.

Cause

“DISC FULL” is displayed while the disc still has a

remaining recordable time.

¶ Please note that resetting the microprocessor clears

the contents stored in, it returns the microprocessor

to the condition when it left the factory.

¶ The remaining time display becomes “0:00” when the

actual total remaining time of the Mini Disc is less than 12

seconds. The recordable time display changes when the

total time of the erased track exceeds 12 seconds.

¶ When a Mini Disc has been subjected to repeated editing,

the remaining time may not increase even after a short

track has been erased.

The recordable time does not increase after a short

track has been erased.

Tracks cannot be combined.

¶ A track created as a result of an editing operation may

sometimes be impossible to be combined with another

track.

The total of the recorded time and recordable time

does not coincide with the total recording time of

the MD (60, 74 or 80 min.).

¶ As recording is performed on a minimum recording basis

of 2 seconds, the displayed time may not coincide with

the consumed disc capacity.

Sound is interrupted when a track created by edit-

ing is subjected to fast forward or fast backward

operation.

¶ Sound interruption may occur due to a combination of

various factors, and it is not a malfunction.

Tracks are not numbered correctly.

¶ A short track may be created depending on the contents

of the recorded source (CD, for example).

The period in which “READING” is displayed is

abnormally long.

¶ “READING” is displayed for a longer period than usual

when a brand-new recordable Mini Disc (a virgin disc) is

loaded.

The displayed time is incorrect when a monaurally-

recorded Mini Disc is played.

¶ This is because the monaural recording and stereo re-

cording use different formats, and not a malfunction.

The total number of characters used in the titles is

less than 1792 characters.

¶ As the title recording areas are used on a per-7-character

basis, the total number of input characters may be less

than 1792.

1 2 ... 44 45 46 47 48 49 50 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenwood DM-SG7 Bedienungsanleitung Seite 49

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für CD Spieler Kenwood DM-SG7