Installation
1. Install the mounting sleeve.
• Install the sleeve to the chassis
NA/ith lugs. Bend the lugs using a
screwdriver.
♦ The lugs differ depending on the
thickness of the dash panel.
2. Insert the KRC-99911 into the sleeve.
• Mount the panel with brackets to the unit as shown in the figure.
♦ Insert the unit into the sleeve, and it will be fixed with both sides.
Bracket
'T<
Trimmed panel
Note: Fix the trimmed panel to the KRC-99911
after mounting the bracket to the panel.
16 (En)
Kommentare zu diesen Handbüchern