Kenwood KRC-999II Bedienungsanleitung Seite 11

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 18
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 10
Auto memory
Five stations in the selected band can automatically be memorized,
1. Turn the power ON.
2. Select the desired band {FMl to FM3 or AM).
3. Press the Memory switch. An " 8 " indicator blinks in the preset channel indicator for
about 5 seconds.
4. While the " 8 " is blinking, press the Fast-Forward switch.
5. The selected band is automatically scanned and five stations are memorized. When 5 sta
tions are memorized, the auto memory function is automatically released,
Equalizer curve display and Spectrum analyzer display
1. When the Tape or Tuner switch is ON, press the Equalizer switch.
2. Press the Equalizer/Analyzer switch to select the Equalizer curve display or the Spectrum
analyzer display.
3. Press the Tape or Tuner switch again, whichever was previously selected, to resume nor
ma! status.
Adjusting the equalizer
1. When the Tape or Tuner switch is ON, press the Equalizer switch.
2. Press the Equalizer/Analyzer switch to display the equalizer curve.
3. Select the frequency band to be adjusted with the Equalizer band select switch. The ad
justable band indicator blinks for about 5 seconds.
4. While the band indicator is blinking, adjust the Equalizer level Up/Down switch to get the
required response.
5. Press the Tape or Tuner switch, whichever was previously selected, again to resume nor
mal display status.
Equalizer curve memory
1. Adjust the response of each frequency band according to steps 1 through 4 in "Adjusting
the equalizer",
2. Press the Memory switch. An "M" indicator blinks for about 5 seconds.
3. While the "M" indicator is blinking, press the Equalizer curve preset switch. The currently
adjusted equalizer curve is stored in memory.
Adjusting the clock
1. Keep the Memory switch pressed.
2. While pressing the Memory switch, set the minute digits with the Fast-Forward switch,
and the hours digits with the Rewind switch.
* This operation should be performed when the display shows the time.
(En) 11
Seitenansicht 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare