CASSETTE TUNER EQUALIZERKRC-999 nINSTRUCTION MANUALTake the time to read through this instruction manual. Familiarity with installation and
Tape remaining indicatorWhen C-30 (1 5 minutes on both sides) to C-90 (45 minutes on both sides) are used, the remaining tape volume (approximat
Auto memoryFive stations in the selected band can automatically be memorized,1. Turn the power ON.2. Select the desired band {FMl to FM3 or AM).3
Care and maintenance• The power source of this unit is exclusively DC 12 V, negative ground. If you wish to mount the unit on a
Connections Install the KRC-999U in a following manner and wiring them1. Before installation and wiring, remove the ( —) terminal of the battery to
ConnectionsGround lead (black) (-)To metal chassis of the car for groundTтттггтMemory back-up power lead (yellow)( + )Lbe ФBatteryAccessory power lea
IConnector for tunerI Tuner outputTuner unit—2 Antenna inputAntenna extension cord=4i=<IZl<^AUX input Rear output^ Power amplifier inputCar ante
Installation1. Install the mounting sleeve.• Install the sleeve to the chassis NA/ith lugs. Bend the lugs using a screwdriver.♦ The lugs dif
3. Fix the KRC-999II with staysPart of chassis[How to remove the KRC-999II]L-shaped wrenchMounting screw (M4 x 6}1. Remove the mounting screw (
SpecificationsSpecification subject to change without notice.FIVl Tuner SectionFrequency range...
Controls and indicatorsReset buttonWhen the installation and all the wirings are finished, press this button.Not usually used. However, when
[TAPE]: Operation and indication when the Tape switch is ON.[TUNER]: Operation and indication when the Tuner switch is ON.[EQ]: Operation an
Controls and indicators[TUNER]; Manual/Auto switchThis switch IS used to select the tuning nnode; Auto 1 (seek), Auto 2 (preset seek) or Manual.5 -Jl
Equalizer switchPress this switch when adjusting the graphic equalizer or other equalizer- related operation. This switch can be activate
Controls and indicators (Control drawer section)[EQ]: Equalizer band select switchesThese switches are used to select the equalizer band to b
Fader switchWhen this switch is set to ON, the indicator illuminates and fader adjustment can be performed with the Audio Control Up/D
Operation Tape playback1. Turn the power on.2. When a cassette is inserted with the cassette shell opening at the right, playback starts.3. Selec
Index ScanThe beginning of each tune can be detected, and played back for about 10 seconds continuously so that the desired tune is
Kommentare zu diesen Handbüchern