Kenwood TM-255E Bedienungsanleitung PDF herunterladen (Seite 53)

12 MiUiirENftiiCE

GENERAL INFORMATION

Your transceiver has been factory aligned and tested

to specification before shipment. Under normal

circumstances, the transceiver will operate in

accordance with these operating instructions. All

adjustable trimmers, coils and resistors in the

transceiver were preset at the factory. They should

only be readjusted by a qualified technician who is

familiar with this transceiver and has the necessary

test equipment. Attempting service or alignment

without factory authorization can void the transceiver

warranty.

When operated properly, the transceiver will provide

years of service and enjoyment without requiring

further realignment. The information in this section

gives some general service procedures requiring little

or no test equipment.

Note:

♦ Record the date of purchase, serial number and dealer from

whom the transceiver was purchased.

♦ For your own information, retain a written record of any

maintenance performed on the transceiver.

♦ When claiming warranty service, please include a photocopy of

the bill of sale, or other proof-of-purchase showing the date of

sale.

CLEANING

The keys, controls and case of the transceiver are

likely to become soiled after extended use. Remove

the controls from the transceiver and clean them with

a neutral detergent and warm water. Use a neutral

detergent (no strong chemicals) and a damp cloth to

clean the case.

SERVICE

If it is ever necessary to return the equipment to your

dealer or service center for repair, pack the

transceiver in its original box and packing material.

Include a full description of the problems experienced.

Include your telephone number along with your name

and address in case the service technician needs to

call for further explanation while investigating your

problem. Don't return accessory items unless you feel

they are directly related to the service problem.

You may return your transceiver for service to the

authorized KENWOOD Dealer from whom you

purchased it or any authorized KENWOOD Service

Center. A copy of the service report will be returned

with the transceiver. Please do not send

subassemblies or printed circuit boards. Send the

complete transceiver.

Tag all returned items with your name and call sign for

identification. Please mention the model and serial

number of the transceiver in any communication

regarding the problem.

INTERNAL ADJUSTMENTS

REMOVING THE CASE

CAUTION: Always turn OFF the power and unplug the DC power

cable first.

Remove the 9 screws from the case. Lift off the 2

sections of the case.

SERVICE NOTE

Dear YL/OM,

If you desire to correspond on a technical or

operational problem, please make your note short,

complete, and to the point. Help us help you by

providing the following:

1 Model and serial number of equipment

2 Question or problem you are having

3 Other equipment in your station pertaining to the

problem

4 Meter readings

5 Other related information

CA UTION: Do not pack the equipment in crushed newspapers for

shipment! Extensive damage may result during rough handling or

shipping.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 65 66

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenwood TM-255E Bedienungsanleitung Seite 53

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Radio Stationen Kenwood TM-255E