Kenwood TM-255E Bedienungsanleitung PDF herunterladen (Seite 17)

2 GETTING ACQUAINTED

MICROPHONE

In general, these buttons perform the same function

as the Alternate Tuning control. They raise or lower

the VFO frequency, the memory channel number, the

Tone/CTCSS frequency, or the DTSS/Page code

digits. Holding either button down causes the action

to be repeated. Also, in Menu Setup, the buttons are

used to switch among available menu selections for

each menu number.

Press to transmit: release to receive. Also, press to

exit Scan and DTSS/Page code setting.

0 LOCK switch

Locks all microphone functions except [PTT] and, if

equipped, the DTMF keypad. This switch does not

lock Front Panel buttons.

These keys do not have fixed functions, i.e. their

functions can be assigned and changed by the

operator {page 35}. By default, the keys have the

following functions:

[PF] key

Accesses the last menu number used in Menu Setup.

[VFO] key

Each press toggles between VFO A or VFO B. Same

function as [A/B] on the Front Panel.

[MR] key

Selects Memory Recall for access to the memory

channels. Same function as [MR] on the Front Panel.

[CALL] key (MC- 45/45DM)

Recalls the Call channel. Same function as [CALL]

on the Front Panel.

[1750]

key (MC-45E/45DME)

Sends a 1750 Hz tone for repeater access.

0 DTMF keypad (some versions only)

The 16-key keypad is used to transmit DTMF tones.

MICROPHONE CONNECTOR

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 65 66

Keine Kommentare

Kenwood TM-255E Bedienungsanleitung Seite 17