Kenwood TM-255E Bedienungsanleitung PDF herunterladen (Seite 51)

PAGE CODE AND REPEATERS

Pressing [PTT] transmits the Page code after a short

delay. This delay helps avoid losing Page data when

using repeaters with long response times that may

miss receiving a portion of the Page code.

The delay time is 250 ms during simplex operation.

When using a transmit offset or a split frequency, you

can change 350 ms (default) to 550 ms via Menu B,

No. 65 {page 14}.

Note: When a repeater ID and a Page code are transmitted at the

same time, Page may not function.

10 PAGE

LOCKING-OUT CODES

This function is useful if you wish to inhibit the

transceiver from receiving specific Group Page codes.

Page Lock-out does not inhibit the transceiver from

receiving stations calling your individual Station code.

Although the codes are locked-out from the receiver,

the transmitter still transmits a Page on the locked-out

channels.

Lock-out Page codes with the following procedure.

1 Press [F], [REV] to activate Code Select.

2 Turn the Alternate Tuning control to select the

Page memory that contains the Page code that

you want to lock-out.

3 Press [MR].

• A "star" appears above the Menu No. indicating

the Page code is locked-out.

4 Press [CLR] or [PTT].

• The previous mode is restored.

Note: You cannot lock-out Page memory 0 or A.

AUTO PAGE CANCEL

After successfully paging another station, it is useful

to turn OFF Page to eliminate sending a Page code

each time you transmit. Auto Page Cancel handles

this situation automatically when a station you called

responds using the correct Page code to open your

transceiver's squelch. On your next transmission,

your transceiver then switches OFF your transceiver's

Page function.

Turn this function ON or OFF via Menu B, No. 63

(page 14). The default is OFF.

OPEN PAGE

When both this function and Page are ON, any signal

opens the squelch; however, if a correct Page code is

received, the calling station's code appears on the

Display. This feature is beneficial when you want to

generally monitor activity on a frequency but you want

to be especially sure not to miss a friend's call.

Turn this function ON or OFF via Menu B, No. 64

(page 14}. The default is OFF.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 65 66

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenwood TM-255E Bedienungsanleitung Seite 51

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Radio Stationen Kenwood TM-255E