Kenwood KRF-V4530D Bedienungsanleitung PDF herunterladen (Seite 26)

Operations

Ambience effects

When the DTS signal is input: (KRF-V7030D only)

(The DTS indicator lights up.)

1 DTS: DTS surround

2 STEREO: Normal stereo playback

When the analog signal or the digital signal except for the

DOLBY DIGITAL or DTS signal is input:

1PRO LOGIC: PRO LOGIC surround (The PRO LOGIC

indicator lights up.)

23 STEREO: 3-STEREO surround (The 3 STEREO indicator

lights up.)

3 STEREO: Normal stereo playback

Adjust the volume.

• If a Dolby Digital signal having more channels than the maximum

number of playback channels available using the receiver’s current

settings is input, the DOWN MIX indicator on the front panel lights

up and downmixing is performed to match the number of available

channels.

Notes

• Depending on the type of the signal or speaker setting, some listening

modes cannot be selected.

• When playback is started, the sound may be cut or interrupted before

the input source is confirmed as Dolby Digital.

• To enjoy Dolby Digital (AC-3) surround (as well as all the other listening

modes) from a single component, be sure to use a Dolby Digital (AC-

3) compatible source component. Connect the Dolby Digital (AC-3)

compatible source component's Dolby Digital (AC-3) format digital

audio signal to one of the DIGITAL INPUT jacks on the back of the

receiver. Connect the normal audio signal correctly to the respective

component's AUDIO jacks. 890

DVD 6-channel playback

Using a DVD player or the like equipped with six (5.1) output channels and

the receiver, you can enjoy surround sound playback.

When you try to play a disc other than Dolby Digital (AC-3) such as DTS

CD, no sound is produced or, noise may be heard. To avoid this situation,

make sure that you connect the component to the receiver’s DVD 6CH.

INPUT jacks through a surround processor which can decode the

surround signal you wont to listen to.

Connecting a DVD player which can decode the surround signal itself is

also acceptable.

Preparations

Select “DVD/6ch” as the input source.

• If speaker system B is on when “DVD/6ch” is selected as the input

source, it switches off and speaker system A turns on automatically.

Start playback of the DVD software.

Adjust the volume.

• It is not possible individually to adjust the volume level or sound quality

(SET UP, SOUND) of the separate channels when the receiver is in the

DVD 6ch mode. Adjust the volume with the controls of the DVD player.

For the powered subwoofer, you can adjust the volume of the

subwoofer using the subwoofer’s own volume control.

• (KRF-V5030D/V4530D only)

When you press the POWER (DVD) key and the DVD player does not

turn on, press the 1 or 2 key during pressing the POWER (DVD) key.

• Connect your DVD player to the DVD 6ch jacks of the receiver.

• Turn on all other components that will be used.

• Complete “Preparing for surround sound”. %

Select "6CH INPT" by pressing the INPUT MODE key.

DVD



RC-R0610



RC-R0510

INPUT SELECTOR

DVD

INPUT MODE

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Kenwood KRF-V4530D Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger und Verstärker Kenwood KRF-V4530D