Kenwood th-k20a Bedienungsanleitung PDF herunterladen (Seite 42)

AUTOMATIC REPEATER OFFSET

This function automatically selects an offset direction and activates the Tone

function, according to the frequency that you have selected. To obtain an up-to-

date band plan for repeater offset direction, contact your national Amateur Radio

association.

1 Enter Menu mode and access Menu No. 8 (ARO).

2 Rotate the ENC control to select “ON”.

3 Press [F] to store the setting.

4 Press [MENU] or [PTT] to exit Menu mode.

TH-K20A K type: TH-K20E (E type):

Under 145.100 MHz No offset Under 145.600 MHz No offset

145.100 ~ 145.495 MHz – offset 145.600 ~ 145.795 MHz – offset

145.500 ~ 145.995 MHz No offset 145.800 MHz and higher No offset

146.000 ~ 146.395 MHz + offset

146.400 ~ 146.595 MHz No offset

146.600 ~ 146.995 MHz – offset

147.000 ~ 147.395 MHz + offset

147.400 ~ 147.595 MHz No offset

147.600 ~ 147.995 MHz – offset

148.000 MHz and higher No offset

Note: Even when setting the TH-K20A/ TH-K40A M type and TH-K40E (E type) model to

“ON”, the ARO function will not operate.

REVERSE FUNCTION

After setting a separate receive and transmit frequency, you can exchange these

frequencies using the Reverse function. This allows you to manually check the

strength of signals you receive directly from other stations, while using a repeater.

If the station’s signal is strong, move to a simplex frequency to continue the

contact and free up the repeater.

Press [REV] to turn the Reverse function ON or OFF.

• When the Reverse function is ON, the “ ” icon will appear on the display.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 67 68

Keine Kommentare

Kenwood th-k20a Bedienungsanleitung Seite 42