Kenwood TH-K2E Bedienungsanleitung PDF herunterladen (Seite 53)

Press [F], [MENU] (1 s) to switch the function ON (or

OFF).

•“” appears when the function is ON.

• While direct contact is possible, “

” blinks.

Note:

◆ Pressing [PTT] switch causes the “ ” icon to quit blinking.

◆ ASC can be activated while operating in Simplex mode.

However, it does not change the Transmission/ Reception

frequencies.

◆ ASC does not function during scan.

◆ ASC does not function while Weather Alert function is activated

(TH-K2AT K/ K2 only) {page 55}.

◆ Activating ASC while using Reverse, turns Reverse function OFF.

◆ If you recall a memory channel or the Call Channel that contains

a Reverse ON status, ASC is switched OFF.

◆ ASC causes received audio to be momentarily intermitted every

3 seconds.

TONE FREQ. ID SCAN

This function scans through all tone frequencies to

identify the incoming tone frequency on a received

signal. You can use this function to determine which

tone frequency is required by accessing your local

repeater.

1 Press [MENU].

2 Turn the Tuning control to select Menu No. 3 (T).

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 153 154

Keine Kommentare

Kenwood TH-K2E Bedienungsanleitung Seite 53